[TowerTalk] Groundiing tower legs

[Grant Saviers]

Certainly there is enough clearance on a diagonal brace.  Make a clamp 
from SS shim stock and a couple of SS bolts. A single 8x12" sheet will 
do a half dozen clamps for $10. http://www.mcmaster.com/#shim-stock/=rp1kee

Grant KZ1W

On 4/25/2014 12:09 PM, Ralph Bolt via TowerTalk wrote:
> I recently installed a USTower TMM-541 crank-up.  Now I'm installing the ground system and have a problem:
>
> I ordered stainless steel hose clamps from DX-Engineering to attach copper strap to the tower legs but there seems to be no way to place the clamp on the legs in such a way as to not interfere with the leg guides of the second tower section.
>
> I suppose I could install a stop of some sort to keep the tower from descending the final inch or so but that seems like a poor solution.
>
> Anyone solved this problem?
>
> Ralph, K0HML
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>