[TowerTalk] Ring Rotor ?

Tim Duffy k3lr at k3lr.com
Fri Dec 5 12:59:52 EST 2014


Yes, it is a 500 ohm 10 turn pot. It has to be to work with the gears and
the controllers.

73,
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
john at kk9a.com
Sent: Friday, December 05, 2014 12:49 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Ring Rotor ?

In my opinion the Clarostat were the most problematic. Is the DX
Engineering replacement a 500 ohm pot?

John KK9A


To:	"'Wayne Kline'" <w3ea at hotmail.com>,	<towertalk at contesting.com>
Subject:	Re: [TowerTalk] Ring Rotor ?
From:	"Tim Duffy" <k3lr at k3lr.com>
Reply-to:	k3lr at k3lr.com
Date:	Fri, 5 Dec 2014 11:22:24 -0500


Here is the best pot (sealed) for TIC motors.

http://www.dxengineering.com/parts/dxe-ticgen-pot


All 18 of the K3LR TIC Ring Rotors use this one.

73,
Tim K3LR



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Wayne
Kline
Sent: Friday, December 05, 2014 11:13 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Ring Rotor ?

 Preparing for some tower maintenance... I have two Older style  aluminum
black box RR motors.....

OK  I need to replace a POT   My question is .....The original 1022 1032
were they the BLACK Pots and then Carl upgraded to the Blue " Bourns 3590S "

or is it the Black Pot  "Clarostat  73JA "    the better   WX resistant pot
.

Wayne W3EA

PS wish I had  digital  I phones... to document  ....years ago ...

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list