[TowerTalk] Multi-Op Station Interconnect coax type?

[Martin Flynn]

 N2MO is using Andrew FSJ4-50B from the operating positions to the patch bay and triplexers,

We ordered the 403A triplexers with the 7/16 DIN option, with the patch bay being 7/16 DIN as well.

73 Martin 
W2RWJ

Sent from my iPhone

> On Dec 26, 2014, at 10:34 AM, Rich Hallman - N7TR <rich at n7tr.com> wrote:
> 
> Im re-cabling a 4 transmitter station and am looking for feedback on what you are using for interconnect coax after your amplifiers?  I'm using double shielded RG8X for the low power connections to the low power bandpass filters then to the amplifier inputs.  Looking to see if good quality RG213 / RG8 (95-98% shield) is ok past the amps to the high power 4O3A filters or should I use something like LMR400 / BuryFlex for those connections to keep down the potential inter-station interference?
> 
> Thanks...
> Rich
> 
> Rich N7TR
> ex KI3V, N3AMK, WB3JOV
> http://www.qrz.com/db/N7TR
> Telnet: dxc.n7tr.com N7TR DXCluster
> 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>