[TowerTalk] Penetrox cleaning

[EZ Rhino]

+1.

WD40, elbow grease and scotch brite work wonders.

Chris
KF7P








On Feb 22, 2014, at 12:47 , Ralph Bellas wrote:

Doug, I use WD40 and a green scouring pad.  I wear gloves for this job because your hands will get stained.  It seems to work as well as fine steel wool.  Invariably I got a sliver of steel wool in my hands.   In 40 years I always got used antennas and refurbished them.   If a plated U bolt was rusted I found a galvanized one and replaced always what nuts and bolts I could with stainless steel & anti-seize.RalphK9ZO



> Date: Sat, 22 Feb 2014 09:46:36 -0800
> From: dougwe2 at gmail.com
> To: towertalk at contesting.com
> Subject: [TowerTalk] Penetrox cleaning
> 
> I recently became the owner of a used KT34M2 that had been up for several
> years.  Is it advisable to completely disassemble and clean off all the
> Penetrox before putting it back on the tower?
> 
> What's the best method for removing that gunk?
> 
> Thanks!
> 
> Doug
> K7IP
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
		 	   		  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk