[TowerTalk] Pentrox removal

[Dan Evans]

My favorite method is to wrap the scotch brite around an old drill bit, then use the drill to spin it.  Works great to clean the inside of the tubing...

Dan
 
-- 
K9ZF
Amateur Radio Emergency Service, Clark County Indiana. EM78el
former K9ZF /R no budget Rover ***QRP-l #1269
Check out the Rover Resource Page at:
<http://www.qsl.net/n9rla>
List Administrator for: InHam+grid-loc+ham-books
Ask me how to join the Indiana Ham Mailing list!



On Saturday, February 22, 2014 8:08 PM, "jcjacobsen at q.com" <jcjacobsen at q.com> wrote:
 
Hi Doug, 
>
>I'll put in the 3rd vote for WD40 and "greenies" type scouring pad. I wore a pair of rubber covered gloves while cleaning tubing. They were a little bulky but kept the hands cleaner. 
>
>And THEN, for some reason, I didn't put them on. Hands got messy, but tolerable. just have to watch out for the burrs in the aluminum. Wrap a small chunk of green pad around a small dowel or phillips screwdriver to clean the inside of the tubing. 
>
>73 
>K9WN Jake 
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>