[TowerTalk] Rotor direction display is 90 degrees off

[Richard (Rick) Karlquist]

Disconnect the rotor cable from the control box
and measure the pot connections with an ohmmeter.
This will confirm (in all likelihood) that there
is nothing wrong up the tower.  Now you can
troubleshoot the control box.  If there was
going to be trouble up the tower, it would
be that the pot wiper was intermittent, not
that it was mechanically rotated.

Rick N6RK

On 2/23/2014 7:28 PM, Allen R. Brier wrote:
> Is it possible that the pot inside my TailTwister rotor has moved? My

> Allen R. Brier N5XZ / KL5DX
>