[TowerTalk] Phillystran Cable Question

Cqtestk4xs at aol.com Cqtestk4xs at aol.com
Tue Feb 25 22:15:06 EST 2014


I had a chance to pick up some of the old style Philly without ends.   This 
stuff needs to have "potted" ends.  Plan on spending at least $35 for  each 
"empty" end and at least $70 for the resin potting compound.  You will  
find the cost is prohibitive unless you are pouring a dozen or so ends, since  
the potting mix has to mixed all at once.
 
The factory can give you the details.
 
Bill K4XS/KH7XS
 
 
In a message dated 2/26/2014 2:38:46 A.M. Coordinated Universal Time,  
Gunsrus1942 at Comcast.net writes:

I'm  going to be using Phillystran Cable .22 size and am not able to use 
the  "Big Grip" on a couple of the ends & was wondering if a standard 
"guy  wire clamp" can be used and what is the recommended configuration? 
It  appears that DX Engr. recommends that guy wire clamps only be used on 
.17  and smaller.

Thanks for your input.

73, Tom  W1ALZ
_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list