[TowerTalk] Polyphaser failure mode
Rick Stealey
rstealey at hotmail.com
Thu Jun 26 15:38:57 EDT 2014
> As it turns out, I had a flashover in an N-to-PL-259
> connection
Pete,
Are you saying the Polyphaser is still ok? That the low R was caused by a path within the adapter?
Interesting.
So we don't actually know if the gas tube fired or not then, do we? Because maybe most or all the energy went to ground through the N-PL250 adapter before it got to the place where the arrestor was mounted. I'm assuming the adapter was out by the tower and the Polyphaser was near the entrance to the shack.
Rick k2XT
More information about the TowerTalk
mailing list