[TowerTalk] Yaesu rotor control question

[Gary A]

Hi Magnus,
   What I did was buy and build a PC to rotor control interface. Check 
out the ERC-M USB Kit. It is easy and fun to build and you can mount it 
inside the G-450 controller housing.  I cut a square hole in the back 
for the USB cable and a small hole for the dc power connector.  Ham 
Radio Deluxe interfaces with it and allows click and turn 
functionality.  I am sure most rotor control software will work.

See it here;
http://schmidt-alba.de/eshop/product_info.php?products_id=18
You will also need the rotorcard kit.
73
Gary
K4FS


On 5/21/2014 12:26 PM, Magnus A wrote:
> Hi
>
> I have a quite small antenna so I am using the G-450XL.
> Now what I really miss with it is the ability to set it to a direction 
> and let it go by itself or even have it going by the logging program 
> to the direction of the call I have in the log.
>
> Did anyone consider, try or make any theoretical calculations of 
> feasability if it is possible to use a G-1000 or G-2800 rotor control 
> box on my G-450XL rotator?
>
> 73 de Magnus SM6WET
>