[TowerTalk] Yaesu rotor control question
Pete Smith N4ZR
n4zr at contesting.com
Fri May 23 16:02:22 EDT 2014
The ERC Version 4, just announced, even includes the relays on the same
card, for a very economical solution.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 5/23/2014 2:14 PM, Gary A wrote:
> Hi Magnus,
> What I did was buy and build a PC to rotor control interface. Check
> out the ERC-M USB Kit. It is easy and fun to build and you can mount
> it inside the G-450 controller housing. I cut a square hole in the
> back for the USB cable and a small hole for the dc power connector.
> Ham Radio Deluxe interfaces with it and allows click and turn
> functionality. I am sure most rotor control software will work.
>
> See it here;
> http://schmidt-alba.de/eshop/product_info.php?products_id=18
> You will also need the rotorcard kit.
> 73
> Gary
> K4FS
>
>
> On 5/21/2014 12:26 PM, Magnus A wrote:
>> Hi
>>
>> I have a quite small antenna so I am using the G-450XL.
>> Now what I really miss with it is the ability to set it to a
>> direction and let it go by itself or even have it going by the
>> logging program to the direction of the call I have in the log.
>>
>> Did anyone consider, try or make any theoretical calculations of
>> feasability if it is possible to use a G-1000 or G-2800 rotor control
>> box on my G-450XL rotator?
>>
>> 73 de Magnus SM6WET
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
More information about the TowerTalk
mailing list