[TowerTalk] Best Balun

[Gary K9GS]

Like these?

http://www.dxengineering.com/parts/dxe-ecls-200

They have other sizes available.

On 11/26/2014 10:30 PM, Wayne Kline wrote:
> Another neat trick with a torrid wound  balun.
>   
> I  weld a #10-32   1/2  machine screw to a 2" all stainless hose clamp  jus 1" past the end of the tightening slots.
>   
> I then drill a hole in the  4" dead center in the bottom of the NEMA Box/  insert the threaded 10/32 machine screw  in the hole DEAD center of the wound torid
>   
> Instant mounting   all my boom are  2"  but can install what ever size clam you need .
>   
>   
>   Wayne
>   
> Ps
>    4 yrs ago I had a wind milling antenna... the coax STRECHED  RG-213  ... ripping the  brad and stretching  the insulation rg8X size  never tor the center conductor.
>   
> the W2FMI build torrid stayed   attached to the boom by the  #10 machine screw ..
>   
>   
>
>   
>   		 	   		
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> -- 
> 73,
>
> Gary K9GS
>
> Greater Milwaukee DX Association: http://www.gmdxa.org
> Society of Midwest Contesters: http://www.w9smc.com
> CW Ops #1032   http://www.cwops.org
>
> ************************************************