[TowerTalk] Joining Boom Tubing

[john at kk9a.com]

If you are using 6061-T6, I doubt this will work.

John KK9A


To:	pulsarxp at embarqmail.com, towertalk at contesting.com
Subject:	Re: [TowerTalk] Joining Boom Tubing
From:	Bob via TowerTalk <towertalk at contesting.com>
Reply-to:	WW4T at aol.com
Date:	Mon, 15 Sep 2014 09:07:03 -0400

Quick, cheap easy and effective.....
Go to a local muffler shop...
Show them what you're trying to do...
Let them put the tubing in their 'expander'....and bump it open   slightly
for the fit you need....
I would take a short sample for them to practice on before doing the pieces
 you actually use....
Shouldn't cost but a few $$, and take a few minutes of their time...
GL

Bob   _ww4t at aol.com_ (mailto:ww4t at aol.com)