[TowerTalk] 25G Top for Bearing

[Roger (K8RI) on TT]

There's nothing wrong with making a flat top plate for the light duty 
25G, or even the 45G as long as the material is of the proper thickness 
and the welds are good.  I have both  (no extras.) and would not 
hesitate to make my own.

73

Roger  (K8RI)

On 4/2/2015 8:58 AM, Mike Ryan wrote:
> A local friend here in the Tampa Bay area is going to finish up his 
> 60ft tower this weekend. I just found out this morning that he is 
> going to use some sort of home made rotor shelf style plate with holes 
> cut for a TB3 as the top.  This is disaster in the making especially 
> since I have some idea about what antennas he plans to put above it. 
> Does anyone have one of the short top bolt on sections or anything 
> else from the accepted array of products to do this job correctly, 
> which they would be willing to part with? Thanks...  - Mike
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


-- 

73

Roger (K8RI)


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com