[TowerTalk] Correction: Need documentation for Rohn HW (35G /Motorola tower)

[Dan Cisson]

The "official name"of it from Rohn,,, was HW ...Made exclusely for Motorola 
in the 60's.. It is on a 15 inch face,,, and should be treated as Rohn 
25G...
DO NOT treat it as 45,, it is not that strong.. the leg diameter and gauge 
is same as 25G  The zig zag bracing is same as 25G
Rohn 45 is on a 18 inch face,, and 25 on a 12 inch face.... But,, A very 
good tower....It is hard to find...  73 GL,, Dan N4GNR

-----Original Message----- 
From: John Keating
Sent: Tuesday, June 9, 2015 4:16 PM
To: John Keating ; towertalk at contesting.com
Subject: [TowerTalk] Correction: Need documentation for Rohn HW (35G 
/Motorola tower)

Sorry, meant "35G"

-----Original Message-----
From: "John Keating" <john.keating at sbcglobal.net>
Sent: ‎6/‎9/‎2015 12:55 PM
To: "towertalk at contesting.com" <towertalk at contesting.com>
Subject: Need documentation for Rohn HW (36G / Motorola tower)

Does anyone have documentation for this tower? I called Rohn, they don't 
have it any more. Tower was produced exclusively for Motorola years ago, 
there are a number of them around.

John / KK6PLG
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk