[TowerTalk] LPFM STL

[Jim Thomson]

Date: Thu, 22 Oct 2015 20:58:16 -0700
From: Jim Brown <jim at audiosystemsgroup.com>
To: towertalk at contesting.com
Subject: Re: [TowerTalk] LPFM STL

On Thu,10/22/2015 6:42 AM, Paul Christensen wrote:
> I am looking into a high power Wi-Fi solution to get our remote site off DSL.

Don't rule out analog audio and RF for the link -- an Ethernet and/or 
WiFi link adds latency.

73, Jim K9YC

## What has latency got to do with it ?   Its not ham gear with tx /rx.
Its   just a low power FM TX.   The usual STL link, like FM broadcasters use,
typ used low power analog FM  for the uhf STL.   WI-FI would probably work just
fine, even if it did have some latency.  Most AM /FM broadcast stations delay
the audio  feed by 7-10 seconds anyway..before it even gets into the input of any
STL link.   In steves case, it’s a moot point. 

Jim  VE7RF