[TowerTalk] Need source for G-2800 controller connector

[AB2E Darrell]

Hi Bob,
I just bought a pair for my older model g-2700SDX from Tom W3FRG who has a complete supply of all the Yaesu plugs/connectors.
You can reach him at W3FRG01 at verizon.net.

If you check his qrz.com page he has pics/prices there.

73 Darrell AB2E


________________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Simon Lewis <gm4plm at hotmail.com>
Sent: Friday, April 29, 2016 6:49 PM
To: bob; towertalk at contesting.com
Subject: Re: [TowerTalk] Need source for G-2800 controller connector

Array solutions?

I’ve seen them on ebay too
Plus I know you can get them at ukw bereichte in Europe



Sent from my Windows 10 phone

From: bob<mailto:w9zv at comcast.net>
Sent: Saturday, 30 April 2016 10:05 AM
To: towertalk at contesting.com<mailto:towertalk at contesting.com>
Subject: [TowerTalk] Need source for G-2800 controller connector

I have a G-2800 rotator that I am pulling out of the closet to use and I
cannot find a source for the Jones type connector that is on the rotator
controller box (NOT the rotator end).



The connector has two rows of 3 horizontal pins with one of them
keyed/oriented 90 deg from the others.  I have looked on Mouser/DigiKey and
while the have them with 6 pins in two rows, I cant find one with the one
pin keyed/polarized from the others?



Anyone have a source for them?



-bob, w9zv

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk