[TowerTalk] Need source for G-2800 controller connector
john at kk9a.com
john at kk9a.com
Fri Apr 29 21:29:34 EDT 2016
I have owned four Yaesu G-2800 rotators and they all had Molex type
connectors not Jones. I purchased extra connectors and pins from Yaesu.
They were expensive but fit perfectly.
John KK9A
To: <towertalk at contesting.com>
Subject: [TowerTalk] Need source for G-2800 controller connector
From: "bob" <w9zv at comcast.net>
Date: Fri, 29 Apr 2016 09:24:00 -0500
List-post: <towertalk at contesting.com">mailto:towertalk at contesting.com>
I have a G-2800 rotator that I am pulling out of the closet to use and I
cannot find a source for the Jones type connector that is on the rotator
controller box (NOT the rotator end).
The connector has two rows of 3 horizontal pins with one of them
keyed/oriented 90 deg from the others. I have looked on Mouser/DigiKey and
while the have them with 6 pins in two rows, I cant find one with the one
pin keyed/polarized from the others?
Anyone have a source for them?
-bob, w9zv
More information about the TowerTalk
mailing list