[TowerTalk] Noise Cancelling For 6M

[Jim Kennedy]

Jim,  I use a JPS Communications ANC-4 for noise cancelling on 6M and use a 4el 6M Hy Gain antenna as the noise sensing antenna. It works effectively for me. I live in an urban environment with lots of noise sources of course. I find the ANC-4 to be effective on most of them. I have found the key for the ANC-4 to be effective on 6m is the sense antenna. 

Jim
W7OUU 

----- Original Message -----
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: "towertalk reflector" <towertalk at contesting.com>
Sent: Tuesday, June 21, 2016 11:31:58 PM
Subject: [TowerTalk] Noise Cancelling For 6M

I've got a strong 6M noise source from a solar system at the edge of my 
property, about 400 ft from my 6M antenna. I want to put a 3-el Yagi at 
it and use it to cancel that noise. Ham noise cancelling hardware that I 
know of is all geared to HF.

Over the years, I've heard of CATV operators using this technique to 
kill on-channel QRM from distant stations, so I'm thinking there must be 
hardware to facilitate that. Anyone know anything about this? Any other 
ideas?

Thanks and 73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk