[TowerTalk] F12 C19XR Rivets
jimlux
jimlux at earthlink.net
Sat Mar 12 21:15:31 EST 2016
On 3/12/16 9:56 AM, Jim Thomson wrote:
> Date: Sat, 12 Mar 2016 10:53:02 -0600
> From: Kevin Stover <kevin.stover at mediacombb.net>
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] F12 C19XR Rivets
> ## On a side note, I asked the local mobile aluminum welding guy here in town
> about coming here to weld some thicker wall boom material and other items for me,
> like channel al etc. He told me that IF you don’t require any kind of electrical connection,
> a special kind of glue can be used.... that is one helluva lot strong than any welding process.
> ‘Only god can get it apart’ he tells me. They now glue motor bike frames with it..and also bicycle
> frames etc. It works too, but no electrical connection, and it cant be taken apart, has to
> be cut off. Ironicly, its being used on exotic al car bodies.
A good 2 part Epoxy.
If you do a good job preparing the surfaces, the metal will fail before
the epoxy.
(but I'm thinking about a 3Dprinter on the tower that melts the metal
and casts it in place. )
More information about the TowerTalk
mailing list