[TowerTalk] US Tower gearbox
Les Kalmus
w2lk at bk-lk.com
Mon Sep 5 20:49:39 EDT 2016
John,
Also, check this: http://www.mcmaster.com/#mobil-shc-630-oil/=141jcfz
Good price.
Les W2LK
On 9/5/2016 2:55 PM, Bob K6UJ wrote:
> John,
>
> I don't know the capacity of your TX455 gearbox but it would not be
> over one quart.
> My HDX589 gearbox takes exactly one quart.
> As you probably already know it is important to flush the old gear
> lube out with
> the synthetic lube you are going to use. The original lube and the
> synthetic are
> not compatible. I would order two quarts. That should work fine for
> flush and fill.
> Here's a supplier that I have used.
> https://www.zoro.com/mobil-mobil-shc-630-circulating-iso-220-1qt-120272/i/G0943074/
>
>
> Bob
> K6UJ
>
>
> On 9/5/16 10:27 AM, John Holmes wrote:
>> I was reading with interest the explanations of the lube needed for US
>> Towers. My TX455 has been up for five years now and, while I have
>> lubed the
>> grease fittings regularly, I've never changed the oil. I want to do
>> this now
>> using SHC630 as K6UJ noted. However, before I order this, how much
>> would you
>> recommend I order? Would 2 quarts be enough to both flush the gear
>> assemble
>> and refill it? I'd hate to have too little on hand after draining.
>> Thanks for your help.
>> 73,
>>
>> John W9ILY
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list