[TowerTalk] Antenna model

[jimlux]

On 2/23/17 3:55 AM, john at kk9a.com wrote:
> EZNEC is a great tool and fun to use but it sure would be nice if it
> optimized.

This is why 4nec2 is great.  It has a decent optimizer.  I believe AC6LA 
also has AutoEZ which is a front end for EZNEC



  I am not sure what you impedance is. I am sure that you can
> make it direct feed 50 ohms if you can extend the boom a few feet.  This
> makes it very easy to adjust the DE for low SWR.  GL with your project.
>
> John KK9A
>
>
> To:	towertalk <towertalk at contesting.com>
> Subject:	[TowerTalk] Antenna model
> From:	john nistico <electric911inc at hotmail.com>
> Date:	Thu, 23 Feb 2017 01:16:36 +0000
>
> I used eznec to model a small beam for my son who is going for his general. 2
> element 20 meter yagi on a 10 ft boom the results were pretty good. Any
> suggestions on how to improve? The driven element is 16fy 6 inches per side
> reflector is +10%
>
> John J. Nistico
> 911 Electric Inc.
> 516.325-8993
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>