[TowerTalk] Antenna climbing harness (Rigging)

[Gary]

Back then - they would have free climbed and then attached a belt at the work level....

I was 14 long ago as well,
Joe kk0sd

________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Herbert Schoenbohm <herbert.schoenbohm at gmail.com>
Sent: Monday, February 27, 2017 1:26 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Antenna climbing harness (Rigging)

"Back then"  such a cover on QST would have resulted in stoning of the
editor. Remember all those eons of dull and drab Geeves cartons that
were run over and over and over? I think, however, there was a political
message behind this cover to try and reach out to the distaff side.
Unfortunately the egregious safety errors weren't vetted properly by
proper review by professionals who know tower climbing safety.  In this
area there is no excuse.

Herb Schoenbohm, KV4FZ


On 2/27/2017 3:07 PM, Ed Karl wrote:
> How come the knot on the fall arrester is not tight, before the tie
> wraps (huh?)
>
> On the other hand, I was 14 a l-o-o-ng time ago. Back then this might
> qualify as a "pinup"for the shack.
>
> 73!  ed K0KL

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
TowerTalk Info Page - Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT members have lots of helpful information and are happy to share it.