[TowerTalk] Dx Engineering 15 Meter Yagi

[Patrick Greenlee]

Ahh, yes RF speech processors which most users turned up too far and 
sounded poor.  I couldn't afford one so I had to use the alternative 
method which was to place a stick in the waist band of my jockey shorts 
turning it like a tourniquet about 3-4 revolutions past pain, and 
shouting into the microphone through a toilet paper tube. Sounded about 
the same to the receiving stations.



On 1/2/2017 3:41 PM, Ken K6MR wrote:
> Wasn’t the “original” DX Engineering the RF Speech processor folks from the late 1960s?  W6UED and some others I can’t remember…
>
>
>
> Ken K6MR
>
>
>
> From: Don W7WLL<mailto:w7wll at arrl.net>
> Sent: Monday, January 2, 2017 1:34 PM
> To: towertalk at contesting.com<mailto:towertalk at contesting.com>
> Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
>
>
>
> DX Engineering, Inc. was involuntary dissolved on Aug 24, 1995. The
> principals were Lew Sayre, W7EW and Bill Sattler N0XX. Lew has an email
> address on QRZ, Bill does not. The original DX Engineering, Inc. was located
> in Brownsville OR and was formed in June of 1989.
>
> Don W7WLL
>
> -----Original Message-----
> From: Wayne Kline
> Sent: Monday, January 02, 2017 1:05 PM
> To: W0MU Mike Fatchett ; towertalk at contesting.com
> Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
>
> Hi TT'ers
>
>
> Mike I think  Dudley W5DUD is  talking about the old " DX Engineering " that
> resided in  Brownsville, Or. 97327
>
> I can't  remember this hams  call ??
>
> I installed few of his antennas  in the  late 80's early 90's    The element
> to boom   were black some kind of plastic extrusion. similar to M2
>
>
> Wayne W3EA
>
>
> ________________________________
> From: TowerTalk <towertalk-bounces at contesting.com> on behalf of W0MU Mike
> Fatchett <w0mu at w0mu.com>
> Sent: Monday, January 2, 2017 3:49 PM
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] Dx Engineering 15 Meter Yagi
>
> Did you try DX Engineering?
>
>
> On 1/2/2017 1:26 PM, Dudley Parkin wrote:
>> Hello all , in need of some parts for an old Dx Engineering  15 meter
>> yagi,
>> insulated Boom to Element Brackets,the Boom is 2 in , In Diameter and
>> elements I think are ½ inch, Thanks W5DUD
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> TowerTalk Info Page -
> Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
> lists.contesting.com
> TowerTalk is for discussion of tower and HF antenna construction topics. TT
> members have lots of helpful information and are happy to share it.
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> TowerTalk Info Page -
> Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
> lists.contesting.com
> TowerTalk is for discussion of tower and HF antenna construction topics. TT
> members have lots of helpful information and are happy to share it.
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk