[TowerTalk] Saddle clamps (muffler clamps)

[Steve Maki]

The current 2" and 3" versions (with 3/8" u-bolts) have plenty of u-bolt 
length - I suspect the other sizes do as well, but I've only got the 2's 
and 3's in front of me.

The 2" has 1.5" of bolt thread showing past the saddle when mounted on a 
2" OD tube. The 3" has 1.25" of thread showing when on a 3" OD tube.

-Steve K8LX

On 7/1/2017 13:44 PM, john at kk9a.com wrote:

> I purchased some of these from K5GO/N5DX for a temporary project. The
> pricing was great and so was their customer service! I am not sure if the
> design has changed since DX Engineering took over however the issue that I
> had was I had to use a much thinner plate then I had planned because of the
> short bolt length.
> 
> John KK9A
> 
> 
> To:	"'Steve Bookout'" <steve at nr4m.com>,	<towertalk at contesting.com>
> Subject:	Re: [TowerTalk] Saddle clamps (muffler clamps)
> From:	"Tim Duffy" <k3lr at k3lr.com>
> Reply-to:	k3lr at k3lr.com
> Date:	Fri, 30 Jun 2017 21:12:01 -0400
> 
> Hello Grant:
> 
> If you are looking for Galvanized muffler clamps, these Cycle24 clamps at DX
> Engineering are pretty inexpensive:
> 
> https://www.dxengineering.com/search/brand/cycle-24/product-line/cycle-24-ga
> lvanized-economy-saddle-clamps?autoview=SKU&sortby=Default&sortorder=Ascendi
> ng
> 
> 73
> Tim K3LR