[TowerTalk] Yaesu mast clamps

[Wayne Kline]

The cast clamps used on  Diwa, Wilson, Greate, Yeasue. are  fantastic  except  one weakness.  there tightening  sequence .

With the base bolts and the mast bolts need to be tightened  as specified .


Wayne W3EA


________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of David Robbins <k1ttt at verizon.net>
Sent: Thursday, May 18, 2017 6:07 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Yaesu mast clamps

What about them?  they work just fine for me.  in the beginning on the
g-1000/2700/2800 series they had problems with clamps breaking, they were
replaced free of charge.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Roger
D Johnson
Sent: Thursday, May 18, 2017 20:33
To: towertalk at contesting.com
Subject: [TowerTalk] Yaesu mast clamps


Does anyone have a good solution to the cast aluminum mast clamps used on
the G-1000 rotor.

73, Roger

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk