[TowerTalk] Turnbuckles with Rod Sides

Wayne Kline w3ea at hotmail.com
Mon Sep 11 19:34:49 EDT 2017


If my gray matter recalls,  ES5TV  lost his fantastic  8 -  5 element   H frame ARRAY  because he did not use safety wires  on the turnbuckles and lost  the installation    !    https://www.youtube.com/watch?v=Z9fDlbIFhMs&t=7s


 Wayne  W3EA



________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Wayne Kline <w3ea at hotmail.com>
Sent: Monday, September 11, 2017 7:26 PM
To: Keith Dutson; k1ttt at arrl.net; towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides

I Ditto that Dave.


The Bible ( Rohn Catalogs ) as  far back as I can remember always had a diagram in the  "general " Tab of the catalog  regarding

A: the Safety Wire ( through the turnbuckles Bodies and Eyes   )


B: and if not using  PLP Preforms  Serving the EHS guy wire   . after the last cable clamp .


Wayne W3EA




________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Keith Dutson <kdutson at sbcglobal.net>
Sent: Monday, September 11, 2017 5:43 PM
To: k1ttt at arrl.net; towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides

Same here.  That 1/4 EHS works great.

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of David
Robbins
Sent: Monday, September 11, 2017 4:01 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides

> When using turnbuckles, *don't forget to safety wire them*.  I have never
seen a ham safety wire a turnbuckle.

My turnbuckles are all wired.  I just take a cut off piece of guy wire and
loop it through the bodies of all the turnbuckles and then through the live
side eyes, that way neither side can turn.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Roger
(K8RI) on TT
Sent: Monday, September 11, 2017 20:39
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


More information about the TowerTalk mailing list