[TowerTalk] 40M rotary dipole
Dave Sublette
k4to at arrl.net
Wed Sep 20 10:31:14 EDT 2017
Thanks for all the suggestions on the RF choke. I read the article by K9YC and concluded that the best approach wold be to wind RG8X around 6 Fair-Rite toroids made from type 31 material and 2.4 inches in diameter. The big problem is they are listed at over $17 each from the distributors. I will need 18 of them eventually. 6 each for this dipole and two more yagis. That’s a large price tag, but still cheaper (and better performing) than the commercial units available, according to K9YC.
I have (again at the suggestion in the paper by K9YC) sent a request for quit to Fair-Rite, asking what quantity I would have to buy in order to get “a decent price”. It might work out that I could make a large purchase and offer kits of toroids to the group. I’m not looking to make money. I only want to have a good choke at the lowest price I can find.
I may put the antenna up with a temporary choke on it and replace it when/if I can get the toroids.
I will keep you informed as to what I find.
I appreciate your inputs on this project. It’s been fun.
Dave, K4TO
More information about the TowerTalk
mailing list