[TowerTalk] FW: Fiberglass Enclosure

[Jim]

I just did a search...

Its actually Altelix


May help someone find it.

73
Jim W7RY


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Matt
Sent: Sunday, August 12, 2018 9:30 PM
To: towertalk at contesting.com
Subject: [TowerTalk] FW: Fiberglass Enclosure

Hi Tony,

I've been getting NEMA 3X outdoor boxes off ebay from Aletlix.   They are UV
resistant FRP construction with gasketed doors and drip rails on stainless
piano hinges.  The furnished mounting hardware is also stainless.  They are
available with and without aluminum backplanes.    Prices are very
reasonable compared to other sources. 

P.S. Tip - use a forstner drill bit to cut your conduit holes.

Hope this information is of use.  Good luck on your project.

73
Matt
KM5VI



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of N2TK,
Tony
Sent: Sunday, August 12, 2018 12:49 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Fiberglass Enclosure

Looking for a fiberglass enclosure about 20"H X 16"W X 8"D to mount on the
tower to hold various terminals, relays, etc. Will add a grounded to the
tower aluminum plate in the box for mounting components.  Comparing Stahlin
vs. Allied Moulded. Any experience with either? Any recommendations?

Tnx

N2TK, Tony

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk