[TowerTalk] Rotor loop coax

[Larry Banks]

I always thought a top connector was a good way to ground the coax to the 
tower at the top.  It also makes it a lot easier to replace the loop if need 
be.

73 -- Larry -- W1DYJ


-----Original Message----- 
From: john at kk9a.com
Sent: Sunday, August 19, 2018 21:45
To: towertalk at contesting.com
Cc: n7tb at comcast.net
Subject: Re: [TowerTalk] Rotor loop coax

That is what I use, specifically Belden 8267.  LMR400 is not really not much
better. Assuming that this is not a 100 to 200' tower, why not use the same
coax all the way down the tower and eliminate the top connector?


From: Terry Brown ]
Date: Sun, 19 Aug 2018 09:07:43 -0800

I finally got approval to put up my tower and 10-15-20 meter beam.  Is RG
213
the best and most flexible coax to use from the radiator for the loop for
tower
rotation?   It will connect to LMR-400 down tower leg.

Thanks!

Terry
N7TB

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk