[TowerTalk] Rotor loop coax

[Grant Saviers]

You might use a "beam clamp" or two, designed to fastened to structural 
beams without drilling a hole (usually not allowed by code).  Then 
connect to the threaded hole which is usually used to support a hanging 
pipe, etc.

Available in stainless 304 or 316 if you like corrosion resistant. 
https://www.mcmaster.com/#beam-clamps/=1e8pt5q

Grant KZ1W


On 8/20/2018 9:21 AM, Warren Wolff via TowerTalk wrote:
>     At this point, I have still not found anyone who has a photo
> of how the coax should be grounded at the top of an
> AN Wireless tower.
>     It has angle iron struts and legs; not the round variety.
>
> Warren; W7WY
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>