[TowerTalk] Solid 160 radial plates?

[Les Kalmus]

The bolts in that plate should be up with the nuts and the connections 
on top so they can be reached easily. Tighten a nut and lockwasher on 
the bolt to lock it to the plate, then add the radials (I use 1/4" 
terminals on each wire) and tighten the top nut.

Les W2LK


On 8/28/2018 1:59 PM, Roger D Johnson wrote:
> I just wish the DXE radial plate had the holes tapped for 1/4-20. It's 
> a pain
> getting to the underside with a wrench to remove the nut when you have 
> a bunch
> of radials attached.
>
> 73, Roger
>
>
> On 8/24/2018 1:46 PM, W0MU Mike Fatchett wrote:
>> DXE makes great radial plate.  That is really not what the question 
>> is about.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk