[TowerTalk] Solid 160 radial plates?

[Wes Stewart]

I install SS cap screws from the bottom with a SS lock washer and nut installed 
for retention.  Then the radials with crimped lugs are installed on these 
"studs" with a second washer and nut.  All suitably dosed with anti-seize.

Wes  N7WS

On 8/28/2018 10:59 AM, Roger D Johnson wrote:
> I just wish the DXE radial plate had the holes tapped for 1/4-20. It's a pain
> getting to the underside with a wrench to remove the nut when you have a bunch
> of radials attached.
>
> 73, Roger
>
>
> On 8/24/2018 1:46 PM, W0MU Mike Fatchett wrote:
>> DXE makes great radial plate.  That is really not what the question is about.