[TowerTalk] Coax Lengths for Stacked Yagis

Richard Smith n6kt1 at sbcglobal.net
Thu May 3 15:37:47 EDT 2018

I am part of a team that is building a station that will incorporate stacked yagis on 20 thru 10 meters. We plan to put all of the RF switching at the base of the towers, for ease of troubleshooting and maintenance. My question deals with the lengths of the coax runs between the yagis and the switching box at the base of each tower. 

Example - 15 meter stack:

Upper Yagi at 150'Middle Yagi at 120'Lower Yagi at 90'
One option is to run equal lengths of coax from each yagi down to the switch box, and coil up the excess coax from the middle and lower yagis. But does it make more sense to use shorter runs of coax from the lower antennas to the switchbox? Specifically, if the coax runs from the lower yagis are shorter by multiples of one-half wavelength compared to the upper yagi (using the velocity factor of the coax in the calculation), would all of the yagis still be in phase?
Thanks in advance,
73, Rich, N6KT


More information about the TowerTalk mailing list