May 2018 Archives by author
Starting: Tue May 1 00:50:16 EDT 2018
Ending: Thu May 31 20:18:19 EDT 2018
Messages: 228
- [TowerTalk] Tower install in central Florida
Chester Alderman
- [TowerTalk] Swinging Gate rotor mounts.
Dan Atchison
- [TowerTalk] Ring Rotors
Dan Atchison
- [TowerTalk] Laying out radials around a stone fence
Rob Atkinson
- [TowerTalk] Replacing station ground
Clay Autery
- [TowerTalk] Tower install in central Florida
James Ball
- [TowerTalk] Best stranded wire for antenna ?
Larry Banks
- [TowerTalk] Ground question
Larry Banks
- [TowerTalk] Leg Nuts and Bolts
Raymond Benny
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?
Jeff Blaine
- [TowerTalk] SO2R or Multiop Contesting without interference
Jeff Blaine
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
Bob Shohet, KQ2M
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
Bob Shohet, KQ2M
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
Bob Shohet, KQ2M
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
Bob Shohet, KQ2M
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Bob Shohet, KQ2M
- [TowerTalk] Replacing station ground
Bob Shohet, KQ2M
- [TowerTalk] eliminating the 360 pot in the Ham-m rotators
Kathy Bookmiller
- [TowerTalk] Replacing station ground
Jack Brindle
- [TowerTalk] Coax Lengths for Stacked Yagis
Jim Brown
- [TowerTalk] Laying out radials around a stone fence
Jim Brown
- [TowerTalk] Questions about ARRL HFTA program- need help!
Jim Brown
- [TowerTalk] Questions about ARRL HFTA program- need help!
Jim Brown
- [TowerTalk] SO2R or Multiop Contesting without interference
Jim Brown
- [TowerTalk] Replacing station ground
Jim Brown
- [TowerTalk] Replacing station ground
Jim Brown
- [TowerTalk] Ground question
Terry Brown
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?
CEPitts
- [TowerTalk] Fwd: Tower Permitting Spec's
J Chaloupka
- [TowerTalk] Feedline - Question - Idea
Michael Clarson
- [TowerTalk] Need recommendations for a 40-10m. Yagi
Timothy Coker
- [TowerTalk] Need recommendations for a 40-10m. Yagi
Timothy Coker
- [TowerTalk] LM470 Section 7 rotating ring?
Timothy Coker
- [TowerTalk] Feedline - Question - Idea
Timothy Coker
- [TowerTalk] SO2R or Multiop Contesting without interference
Timothy Coker
- [TowerTalk] Swinging Gate rotor mounts.
Bill Cotter
- [TowerTalk] Feedline - Question - Idea
Mike DeChristopher
- [TowerTalk] Laying out radials around a stone fence
Mike DeChristopher
- [TowerTalk] 3/16 EHS source
Mike DeChristopher
- [TowerTalk] Andrew Hardline Connector Tool Problem
Jeff DePolo
- [TowerTalk] Feedline - Question - Idea
Jeff DePolo
- [TowerTalk] Alumo Weld Wire For F12 Antennas
Russ Dearmore
- [TowerTalk] Coax Lengths for Stacked Yagis
Chuck Dietz
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?
Chuck Dietz
- [TowerTalk] Joining EHS Guy To Philly Guy
Chuck Dietz
- [TowerTalk] Coax Lengths for Stacked Yagis
Tim Duffy
- [TowerTalk] Coax Lengths for Stacked Yagis
Keith Dutson
- [TowerTalk] Force 12 Aluma-o-weld wire
Keith Dutson
- [TowerTalk] Force 12 Aluma-o-weld wire
Keith Dutson
- [TowerTalk] Feedline - Question - Idea
Máximo EA1DDO_HK1H
- [TowerTalk] Questions about ARRL HFTA program- need help!
Máximo EA1DDO_HK1H
- [TowerTalk] Feedline - Question - Idea
Gary
- [TowerTalk] Feedline - Question - Idea
Gary
- [TowerTalk] Feedline - Question - Idea
Gary
- [TowerTalk] HyGain Rotor Mod
Patrick Greenlee
- [TowerTalk] Fwd: Tower Permitting Spec's
Patrick Greenlee
- [TowerTalk] Hy-Gain element tube thickness 0.049 or 0.058"?
Kari Gustafsson
- [TowerTalk] Fwd: Fwd: Tower Permitting Spec's
Hans Hammarquist
- [TowerTalk] Looking for GUY RING for Rohn 45
Hector Garcia,XE2K
- [TowerTalk] Force 12 Aluma-o-weld wire
Howard Hoyt
- [TowerTalk] test
Howard Hoyt
- [TowerTalk] Tower Guy wire plate
Jerry Head II
- [TowerTalk] Laying out radials around a stone fence
Joe Giacobello, K2XX
- [TowerTalk] Dayton Activities before and during Hamvention
W1JCW John
- [TowerTalk] 3/16 EHS source
W1JCW John
- [TowerTalk] 3/16 EHS source
W1JCW John
- [TowerTalk] Crank-up Tower Tension Spring Adjustment ???
John H. Long Jr.
- [TowerTalk] Crank-up_Tower_Tension_Spring_Adjustment_ ???
John H. Long Jr.
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Stan K2STN
- [TowerTalk] Ground question
KD0RII
- [TowerTalk] Laying out radials around a stone fence
Les Kalmus
- [TowerTalk] Fwd: Tower Permitting Spec's
Richard (Rick) Karlquist
- [TowerTalk] Coax Lengths for Stacked Yagis
Richard (Rick) Karlquist
- [TowerTalk] Free Tower
Fred Keen
- [TowerTalk] Replacing station ground
Fred Keen
- [TowerTalk] Coax Lengths for Stacked Yagis
Wayne Kline
- [TowerTalk] Coax Lengths for Stacked Yagis
Wayne Kline
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?
Wayne Kline
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?
Wayne Kline
- [TowerTalk] 3/16 EHS source
Wayne Kline
- [TowerTalk] Joining EHS Guy To Philly Guy
Wayne Kline
- [TowerTalk] Joining EHS Guy To Philly Guy
Wayne Kline
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Wayne Kline
- [TowerTalk] Looking for a tower climber that works in the Gonzales TX area
Mike & Becca Krzystyniak
- [TowerTalk] HyGain HDR-300 Start Cap Value-Rating
Mike & Becca Krzystyniak
- [TowerTalk] Ground question
Ken Lemas
- [TowerTalk] Andrew Hardline Connector Tool Problem
Steve Maki
- [TowerTalk] Joining EHS Guy To Philly Guy
Steve Maki
- [TowerTalk] Joining EHS Guy To Philly Guy
Steve Maki
- [TowerTalk] Fwd: [test-equip-trader] Coax/heliax grounding kits
Pete Manfre
- [TowerTalk] Fwd: [test-equip-trader] Starting with the best… I hope
Pete Manfre
- [TowerTalk] Fwd: [test-equip-trader] connectors ...correction...sorry for dupe
Pete Manfre
- [TowerTalk] Hy-Gain HG-70HD tower thrust bearing info needed
Gary Marks
- [TowerTalk] Best stranded wire for antenna ?
Gary Marks
- [TowerTalk] Hy-Gain HG-70HD crank-up tower cable routing ?
Gary Marks
- [TowerTalk] FW: Leg Nuts and Bolts
Matt
- [TowerTalk] FW: Crank-up Tower Tension Spring Adjustment ???
Matt
- [TowerTalk] Replacing station ground
Bob Matthews
- [TowerTalk] WANTED Saddles for U-bolts
Charles Morrison
- [TowerTalk] Laying out radials around a stone fence
Charles Morrison
- [TowerTalk] Joining EHS Guy To Philly Guy
Charles Morrison
- [TowerTalk] Joining EHS Guy To Philly Guy
Charles Morrison
- [TowerTalk] Orphan VFD sensor box needed
N4ZR
- [TowerTalk] Tower install in central Florida
Alan NV8A
- [TowerTalk] Tower install in central Florida
Alan NV8A
- [TowerTalk] Leg Nuts and Bolts
Joe Partlow
- [TowerTalk] FW: Leg Nuts and Bolts
Joe Partlow
- [TowerTalk] Tower install in central Florida
Chris Pedder
- [TowerTalk] Force 12 Aluma-o-weld wire
Julio Peralta
- [TowerTalk] Fwd: Tower Permitting Spec's
Grant Saviers
- [TowerTalk] Fwd: Tower Permitting Spec's
Grant Saviers
- [TowerTalk] Force 12 Aluma-o-weld wire
Grant Saviers
- [TowerTalk] Coax Lengths for Stacked Yagis
Grant Saviers
- [TowerTalk] Feedline - Question - Idea
Grant Saviers
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?
Grant Saviers
- [TowerTalk] Leg Nuts and Bolts
Grant Saviers
- [TowerTalk] FW: Leg Nuts and Bolts
Grant Saviers
- [TowerTalk] Joining EHS Guy To Philly Guy
Grant Saviers
- [TowerTalk] Grounding Vertical Radials
Grant Saviers
- [TowerTalk] Tower Permitting Spec's
Ed Sawyer
- [TowerTalk] Coax Lengths for Stacked Yagis
Ed Sawyer
- [TowerTalk] Feedline - Question - Idea
Ed Sawyer
- [TowerTalk] SO2R or Multiop Contesting without
Ed Sawyer
- [TowerTalk] SO2R or Multiop Contesting without
Ed Sawyer
- [TowerTalk] Joining EHS Guy To Philly Guy
Allan W Schlaugat
- [TowerTalk] Joining EHS Guy To Philly Guy
Allan W Schlaugat
- [TowerTalk] Feedline - Question - Idea
Herbert Schoenbohm
- [TowerTalk] Tower Guy wire plate
Herbert Schoenbohm
- [TowerTalk] Laying out radials around a stone fence
Kevin Shea
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Gene Smar
- [TowerTalk] Coax Lengths for Stacked Yagis
Richard Smith
- [TowerTalk] Coax Lengths for Stacked Yagis
Richard Smith
- [TowerTalk] Coax Lengths for Stacked Yagis
Richard Smith
- [TowerTalk] Coax Lengths for Stacked Yagis
Richard Smith
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Richard Smith
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Richard Smith
- [TowerTalk] Motorized winch for a crank up tower.
Mal Speer
- [TowerTalk] Leg Nuts and Bolts
Steve, NR4M
- [TowerTalk] Fwd: Tower Permitting Spec's
Wes Stewart
- [TowerTalk] Coax Lengths for Stacked Yagis
Wes Stewart
- [TowerTalk] Coax Lengths for Stacked Yagis
Wes Stewart
- [TowerTalk] Coax Lengths for Stacked Yagis
Wes Stewart
- [TowerTalk] Coax Lengths for Stacked Yagis
Wes Stewart
- [TowerTalk] Need recommendations for a 40-10m. Yagi
Wes Stewart
- [TowerTalk] Laying out radials around a stone fence
Wes Stewart
- [TowerTalk] Laying out radials around a stone fence
Stan Stockton
- [TowerTalk] Laying out radials around a stone fence
Stan Stockton
- [TowerTalk] Pulling cables through conduit -- results
Dave Sublette
- [TowerTalk] Laying out radials around a stone fence
Dave Sublette
- [TowerTalk] Joining EHS Guy To Philly Guy
Dave Sublette
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
Dave Sublette
- [TowerTalk] Force 12 Aluma-o-weld wire
Bryan Swadener
- [TowerTalk] Laying out radials around a stone fence
Kelly Taylor
- [TowerTalk] Laying out radials around a stone fence
Kelly Taylor
- [TowerTalk] HyGain Rotor Mod
Kelly Taylor
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
Dave Thompson
- [TowerTalk] Coax Lengths for Stacked Yagis
Jim Thomson
- [TowerTalk] Coax Lengths for Stacked Yagis
Jim Thomson
- [TowerTalk] Force 12 Aluma-o-weld wire
Jim Thomson
- [TowerTalk] Need recommendations for a 40-10m. Yagi
Jim Thomson
- [TowerTalk] Ground question
Jim Thomson
- [TowerTalk] Laying out radials around a stone fence
Jim Thomson
- [TowerTalk] SO2R or Multiop Contesting without interference
Jim Thomson
- [TowerTalk] Force 12 Aluma-o-weld wire
Richard Thorne
- [TowerTalk] Need recommendations for a 40-10m. Yagi
Richard Thorne
- [TowerTalk] Laying out radials around a stone fence
Don Moman VE6JY
- [TowerTalk] Taking out direction pot on HAM M Tower Talk
FERNANDO MUGUERZA VIDEGARAY
- [TowerTalk] LM470 Section 7 rotating ring?
Andre VanWyk
- [TowerTalk] Joining EHS Guy To Philly Guy
Andre VanWyk
- [TowerTalk] Joining EHS Guy To Philly Guy
Andre VanWyk
- [TowerTalk] SO2R or Multiop Contesting without interference
Drew Vonada-Smith
- [TowerTalk] HyGain Rotor Mod
Dennis W0JX
- [TowerTalk] Replacing station ground
Jim W7RY
- [TowerTalk] Joining EHS Guy To Philly Guy
Dick Green WC1M
- [TowerTalk] 2 5B4AGN bandpass filter kits for sale
Jamie WW3S
- [TowerTalk] Laying out radials around a stone fence
Ian White
- [TowerTalk] Rohn 45 package good price
CULLEM ZETHMAYR
- [TowerTalk] Coax Lengths for Stacked Yagis
Jon Zaimes
- [TowerTalk] Andrew Hardline Connector Tool Problem
Zivney, Terry
- [TowerTalk] Need recommendations for a 40-10m. Yagi
kstover at ac0h.net
- [TowerTalk] Phasing Yagis
cqtestk4xs at aol.com
- [TowerTalk] messed up wiring to key my amp
k7lxc at aol.com
- [TowerTalk] Ground question
k7lxc at aol.com
- [TowerTalk] SO2R or Multiop Contesting without interference
k7lxc at aol.com
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?
kj6y at aol.com
- [TowerTalk] Need recommendations for a 40-10m. Yagi
rlvz at aol.com
- [TowerTalk] Questions about ARRL HFTA program- need help!
rlvz at aol.com
- [TowerTalk] Motorized winch for a crank up tower.
terry burge
- [TowerTalk] Motorized winch for a crank up tower.
gregg.w6izt1 at gmail.com
- [TowerTalk] Fwd: Tower Permitting Spec's
jimlux
- [TowerTalk] suppressing vortex shedding
jimlux
- [TowerTalk] Fwd: Tower Permitting Spec's
jimlux
- [TowerTalk] Force 12 Aluma-o-weld wire
jimlux
- [TowerTalk] Force 12 Aluma-o-weld wire
jimlux
- [TowerTalk] sharing a choke between two dipoles
jimlux
- [TowerTalk] Feedline - Question - Idea
jimlux
- [TowerTalk] Laying out radials around a stone fence
jimlux
- [TowerTalk] SO2R or Multiop Contesting without
jimlux
- [TowerTalk] SO2R or Multiop Contesting without
jimlux
- [TowerTalk] SO2R or Multiop Contesting without
jimlux
- [TowerTalk] Replacing station ground
jimlux
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
jrquark
- [TowerTalk] Re. Guying a Self supporting Tower Beyond the Height of Self Support
jrquark
- [TowerTalk] Coax Lengths for Stacked Yagis
john at kk9a.com
- [TowerTalk] Coax Lengths for Stacked Yagis
john at kk9a.com
- [TowerTalk] Force 12 Aluma-o-weld wire
john at kk9a.com
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
john at kk9a.com
- [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support
john at kk9a.com
- [TowerTalk] Need recommendations for a 40-10m. Yagi
john at kk9a.com
- [TowerTalk] LM470 Section 7 rotating ring?
john at kk9a.com
- [TowerTalk] Feedline - Question - Idea
john at kk9a.com
- [TowerTalk] Feedline - Question - Idea
john at kk9a.com
- [TowerTalk] Feedline - Question - Idea
john at kk9a.com
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?
john at kk9a.com
- [TowerTalk] Leg Nuts and Bolts
john at kk9a.com
- [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?
john at kk9a.com
- [TowerTalk] Joining EHS Guy To Philly Guy
john at kk9a.com
- [TowerTalk] Joining EHS Guy To Philly Guy
john at kk9a.com
- [TowerTalk] Joining EHS Guy To Philly Guy
john at kk9a.com
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
john at kk9a.com
- [TowerTalk] Joining EHS Guy To Philly Guy
john at kk9a.com
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
john at kk9a.com
- [TowerTalk] SO2R or Multiop Contesting without
john at kk9a.com
- [TowerTalk] Replacing station ground
john at kk9a.com
- [TowerTalk] Replacing station ground
john at kk9a.com
- [TowerTalk] Grounding Vertical Radials
john at kk9a.com
- [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?
jcjacobsen at q.com
- [TowerTalk] SO2R or Multiop Contesting without interference
kostas sv1dpi
Last message date:
Thu May 31 20:18:19 EDT 2018
Archived on: Thu May 31 20:22:21 EDT 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).