[TowerTalk] Leg Nuts and Bolts
rayn6vr at gmail.com
Sat May 19 15:15:11 EDT 2018
On my recently installed tx455 that was permitted by my county, my local
welding and nut & bolt supplier was able to order 1 inch by 3 ft threaded
stock astm certified. He also the ordered nuts and flat washers. I'm sure
he could have almost any size larger.
I like to give my business to local vendors.
On Sat, May 19, 2018, 11:44 AM Grant Saviers <grants2 at pacbell.net> wrote:
> The TMM433 SS spec I have is for 1" x 27" length bolts and the PE
> analysis for the TMM433HD (which I own) spec's 1 1/8" x 27" bolts which
> I bought from McMaster-Carr. Either with heavy hex nuts, 2 above and 1
> below the mounting plate.
> Grant KZ1W
> On 5/15/2018 12:12 PM, Joe Partlow wrote:
> > Other than US Tower, where would I get the nuts and bolts use to attach a
> > TMM-433HD to its base? The docs call them out as 0.75 inch diameter
> > 1.25 inch (length?) and dosn't say anything about washers.
> TowerTalk mailing list
> TowerTalk at contesting.com
More information about the TowerTalk