[TowerTalk] Leg Nuts and Bolts

[Grant Saviers]

The TMM433 SS spec I have is for 1" x 27" length bolts and the PE 
analysis for the TMM433HD (which I own) spec's 1 1/8" x 27" bolts which 
I bought from McMaster-Carr.  Either with heavy hex nuts, 2 above and 1 
below the mounting plate.

Grant KZ1W

On 5/15/2018 12:12 PM, Joe Partlow wrote:
> Other than US Tower, where would I get the nuts and bolts use to attach a
> TMM-433HD to its base? The docs call them out as 0.75 inch diameter (A325N)
> 1.25 inch (length?) and dosn't say anything about washers.
>