[TowerTalk] LM470 Section 7 rotating ring?

[Andre VanWyk]

This will work just fine. I did it with a US Tower TX472 before. In fact, I still have the three crankup brackets that slip into the tower legs to mount the tic ring. 
If you go this route and need a set of brackets, let me know as you can have these if you only pay the shipping. 
73’s
Andre
NJ0F

Sent from my iPad

> On May 8, 2018, at 5:20 AM, "john at kk9a.com" <john at kk9a.com> wrote:
> 
> A TIC 1032 should fit.  I guess you'd have to run the cables against the
> tower at the rotator point and coax arms the rest of the way but I have no
> actual experience.
> 
> John KK9A
> 
> 
> Tim  N6WIN wrote:
> 
> Hi all, wondering if anyone is using any commercially made ring rotator
> for an LM470 section 7 (second from bottom) mount? I've currently got a JK
> Mid-Tri mounted to the top of that section with a custom fabricated plate
> fixing it towards EU. I'd like to be able to rotate it if possible.
> 
> If someone has experience with this how does one manage their coax while
> raising and lowering the tower?
> 
> Thanks,
> 
> Tim / N6WIN.
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk