[TowerTalk] Ferrite cores

[Tim Duffy]

That should be 1.4" ID. The OD is 2.4 inches

73
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Tim
Duffy
Sent: Monday, October 08, 2018 11:02 PM
To: k4to at arrl.net; 'kj6y--- via TowerTalk'
Subject: Re: [TowerTalk] Ferrite cores

DX Engineering has nicely color coded ferrite - #31 1.4" OD. 

https://www.dxengineering.com/parts/dxe-tc31-24-4

You never have to think about what mix is "my ferrite" when you get it from
DX Engineering - it's color coded

https://static.dxengineering.com/global/images/chartsguides/d/dxe-acdcgen1-r
fi_hc.pdf

Yes, I work for DX Engineering and I am thrilled that DXE has changed the
way you purchase ferrite - with color codes on the cores.

73
Tim K3LR


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Dave
Sublette
Sent: Monday, October 08, 2018 10:52 PM
To: kj6y--- via TowerTalk
Subject: [TowerTalk] Ferrite cores

Well I've done it again -- I lost the info on where to order the 1.5 inch
type 31 toroids to use when building chokes to feed antennas.  I have
googled all evening, looked at Mouser, Amidon, etc... and can't find them,
 What really irritates me is I bought them and built three chokes not three
months ago and can't remember where i got them from.  :-( Old age is
agravating.

Who can tell me the good supplier for type 31 1.5 inch diameter cores to
wrap RG142 around?

Thanks,

Dave, K4TO
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk