[TowerTalk] Split Loom as an anti-critter device?
Mike & Becca Krzystyniak
k9mk at flash.net
Wed Oct 31 21:11:56 EDT 2018
I have seen the copper shield of FSJ-4 separate at one or more of the rings,
making connections intermittent.
No evidence of physical damage, but there were a lot of thermal cycles.
The leading theory was metal fatigue. FYI, YMMV.
Mike K9MK
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
john at kk9a.com
Sent: Wednesday, October 31, 2018 8:00 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Split Loom as an anti-critter device?
I concur that the Superflex PVC is thin and would not be the best choice for
long outdoor runs both on the tower or buried however I have been using FSJ4
for short outdoor jumpers for many years without issue. I assumed that
professionals like yourself also used this cable outdoors to connect 1 5/8+
Heliax to a device or antenna.
John KK9A
To: towertalk <towertalk at contesting.com>
Subject: Re: [TowerTalk] Split Loom as an anti-critter device?
From: Steve Maki <lists at oakcom.org>
Date: Wed, 31 Oct 2018 19:43:33 -0400
Superflex style cables, where the shield is a spiral configuration rather
than corrugated, is not a good choice for outdoor use. If water gets under
the jacket either from the ends or thru a jacket penetration, it will run
end to end, get into the connectors, and ruin the cable.
The jacket is thin to help with the flexibility, but is easily damaged.
Great for indoor jumpers - not much else.
Use LDF4 if you can.
-Steve K8LX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list