[TowerTalk] Tool for F-connector holes

[jimlux]

On 3/12/19 4:38 AM, tony.kaz--- via TowerTalk wrote:
> Thanks for all the feedback.
> I am using Amphenol F Bulkhead Crimp Jacks for RG-179. Part #222114-10.
> Greenlee doesn't make a DD punch that small.
> I have to drill 14 holes total on several Carlon boxes. And the connectors
> are already crimped on the RG-179.
> It looks like I have two choices. Make a template for the size and shape.
> Drill a small hole. Then use my Rotozip Spiral saw to get the correct size
> and shape.
> Or drill a .375+" hole, use a few drops of epoxy then put on the washer and
> nut and tighten.
> I am leaning towards using the Rotozip as then for sure the connector won't
> turn and easy to replace if needed.
> I had thought there would be something that was off the shelf and not
> exorbitant in price to make these type holes.



what about making a sheet metal "cookie cutter" that you could heat up 
and stamp through?