[TowerTalk] Manually crank down a motorized tower

[Andy Brinkley]

I have a HDX-555 with the motorized lift and it came with a crank handle
that fits the input pulley on the  gear box to manually crank it up or down.

Mine is a belt drive if that makes any difference.

Andy
NC4AB 

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
Robert Harmon
Sent: Wednesday, March 20, 2019 7:40 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Manually crank down a motorized tower


I have a US Tower HDX589MDPL with the motorized drum.  I was wondering what
I would do in the event that something failed in the control box and I
needed to crank it down.
The gearbox has a worm gear and I believe I could temporarily take off the
chain and turn the gear box sprocket by hand.  I would have to turn it until
the cows come home but I think I could crank it down.  Am I correct about
this ?  Have any of you had to crank down your motorized tower by hand ?

Bob
K6UJ

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk