[TowerTalk] Homebrew PCB

[Don]

I was unaware of OSH Park so asked around locally if anyone had used 
them. Good input from one who has.

Was also told of another in the area, Sunstone, maybe a bit more 
expensive, but with free design SW. Here is a link to their site.

https://www.sunstone.com 
<https://www.sunstone.com/?gclid=Cj0KCQjwtr_mBRDeARIsALfBZA5PYAsOFYtrT3s0FgobwCtKJ6OCn8OFz_6YxFcRWbZcKh1dAtwZfVgaAtpkEALw_wcB>

Don T W7WLL

On 5/5/2019 4:53 PM, VE6WZ_Steve wrote:
> Good experience with OSH Park in Oregon for making nice boards. Double side with solder mask and silk screen. https://oshpark.com/ <https://oshpark.com/>
> I use KiCad for design and PCB layout.  OSH Park will take the PCB file as a direct upload from KiCad. Ordering the board right from KiCAd take about 5 minutes!
> Pretty easy to learn KiCad. Free ware here: http://kicad-pcb.org/ <http://kicad-pcb.org/>
>
> 73, de steve ve6wz
>