[TowerTalk] Coil 3.72

[Jim Thomson]

K6STI  has  an  upgraded  free  coil  software version  on  his  website  below. 
Coil  3.72 is  at  the  extreme  bottom  of left  column.
Note,  by  left clicking  on the  ....AWG,  u  can  toggle  between  AWG...and  decimal points of an inch.
It  will  handle  awg  up  to a max   of  0  gauge wire   =  .3249 inch.   Min  AWG  is  52 AWG =  .008 inch. 
In  decimal points of an  inch  mode,  it  will  handle  tubing  up to a max of .5 inch  OD. 

By  left  clicking  on  the ..ditto marks  below  AWG....  u  can  toggle  coil diam,  length, lead length,  form  thickness,   between  inches  and  mm.  

Jim   VE7RF 


http://ham-radio.com/k6sti/