[TowerTalk] I just thought it was fixed.....

[W0MU Mike Fatchett]

What is the length of the run?  What cable did you use?  What is it not 
doing?  Can you hear the brake release and does it make noise?

On 10/11/2019 9:20 AM, john at kk9a.com wrote:
> Could it be a physical problem? Most Hy-Gain rotator need a shim or a 
> standard 2" mast and a thicker shim if you're using water pipe. It's 
> also possible that the brake is sticking or that the motor just does 
> not have much torque for some reason. Years ago, I had an old TIC ring 
> rotator motor that seemed to loose it's torque and replacing the motor 
> (which turned fine with no load) solved the issue.
>
> John KK9A
>
>
> w5jmw wrote:
>
> Still having problems with my run of rotor cable controlling the rotor.I
> have done everything..rotor checks good at ground level.It is now
> vertical,changed cables,same thing I am lost now...ideas? 73 john
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk