[TowerTalk] Tic Ringrotor Question

[Keith Dutson]

My experience is that the ring is likely installed incorrectly.  I would try taking apart and re-assembling.

73, Keith NM5G

-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of Michael Zilavy via TowerTalk
Sent: Sunday, April 5, 2020 12:10 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Tic Ringrotor Question


Good Afternoon,
    Anyone know the secret to getting a Tic Ringrotor not to bind or skip? Working on Model CX-16/22 for weeks and can't get the darn thing to rotate more than 40 degree's before it binds or the ring will not mesh in the motor?Always' too tight or too much play and the the gear wont mesh with the ring.
Frustrating.
Thanks
WA3CMike
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk