[TowerTalk] Tree's and Screws

john at kk9a.com john at kk9a.com
Thu Aug 20 15:12:18 EDT 2020


This is obviously an old article. Cadmium plating was popular and it  
is very good from a corrosion standpoint. The plating process uses a  
cyanide rinse which can create environmental problems. For a while  
cadmium plating was banned in the US but now it is expensive so it  
will not be easy finding Cadmium plated hardware for your trees.

John KK9A

k7lxc wrote:

>  The QST Article from September 1989, "The Care and Feeding of an  
> Amateur's Favorite Antenna Support - the Tree" says Cadmium plated  
> (but I think avoiding Copper is the main thing). The author also  
> mentions removing when done. It's a pretty good article. He is not a  
> fan of topping trees!     This terrific article is also one of the  
> chapters of my UP THE TOWER - The Complete Guide To Tower  
> Construction book. That's one chapter out of 36 - LOTS of info in  
> there! Available from championradio.com.

  Cheers,Steve  K7LXC



More information about the TowerTalk mailing list