[TowerTalk] Rotator Advice

Joseph B. Fitzgerald jfitzgerald at alum.wpi.edu
Tue Dec 29 14:32:16 EST 2020


I followed the procedure in this manual a couple of months back and it worked just fine:

http://www.radiomanual.info/schemi/ACC_rotator/CDE_HAM-4_user_W0MTU.pdf

de KM1P Joe

________________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Tom Wylie <thomasgwylie at gmail.com>
Sent: Tuesday, December 29, 2020 2:29 PM
To: TowerTalk
Subject: [TowerTalk] Rotator Advice

I have refurbished an old Ham IV and now am in the proces of
re-assembling it.   What is the correct way to align the Bell Housing so
that the rotator will be on an end stop.   I cannot find any assembly
instructions nor Youtube videos which cover this part.   I just wondered
if there were any specific tricks or pitfalls to be avoided, once I
start withg the grease and ballbearings.   I had a fault with the wedge
brake which now appears to be free and working normally.


Tom
GM4FDM
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


More information about the TowerTalk mailing list