[TowerTalk] center insulator material

[Wes Attaway (N5WA)]

Jim Brown has a real good article with lots of data re end-feeding a
vertical dipole.  The antenna works really well.

http://www.k9yc.com/VerticalDipole.pdf

   -------------------
Wes Attaway (N5WA)
(318) 393-3289 - Shreveport, LA
Computer/Cellphone Forensics
AttawayForensics.com
   -------------------

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
charlie carroll
Sent: Saturday, February 08, 2020 10:57 AM
To: towertalk at contesting.com
Subject: [TowerTalk] center insulator material

I need some help selecting some type of material to build some custom 
center insulators.  I have what approaches zero experience in this area.

The insulators will be used to support near vertical dipoles for 
160-meters.  The antennas will be installed in the Caribbean and will 
need high resistance to UV and salt water.  I also want to install an 
SO-239 and home made common-mode choke on the insulator.  It would be 
preferable that I be able to fabricate the final shape with common home 
workshop tools and not have to rely on a machine shop.  The insulators 
won't be under a lot of tension because of their orientation, but low 
weight material would be preferred.  The insulators may be subject to 
some winds containing sand particles.

I'm looking for some help selecting some appropriate material (UHMW, 
Ultem, UV augmented HDPE, ...) that I can investigate further.

thanks

73 charlie, k1xx
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk