[TowerTalk] Hy-Tower base

[Wayne Kline]

Bill,

The Hi Tower base is a hinged T and it mounts to the  EARTH with three 1 ¼ “ od tubes that affix to the three  insulators.

IMO  you need to rent a CORE drill  to drill into your exsiting base  and EPOXY the tubes in the holes

Wayne ,
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: john nistico<mailto:electric911inc at hotmail.com>
Sent: Monday, July 13, 2020 5:16 PM
To: Bill Ogden<mailto:ogden at us.ibm.com>; towertalk at contesting.com<mailto:towertalk at contesting.com>
Subject: Re: [TowerTalk] Hy-Tower base

Bill if you can get me the base templates I may be able to weld up something for you

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Bill Ogden <ogden at us.ibm.com>
Sent: Monday, July 13, 2020 4:17:21 PM
To: towertalk at contesting.com <towertalk at contesting.com>
Subject: Re: [TowerTalk] Hy-Tower base

I am contemplating buying a Hy-Tower (AV-18HT) but would like to mount it
on an existing concrete pad. This pad held a TX-455 until recently, is in
good shape, and is certainly large enough. Has anyone done something like
this? How to adapt the Hy-Tower base to an existing concrete pad?  As
expected, I had no response from MFJ/hy-gain when I sent them the question
and the Hy-Tower product manual is not very helpful.

Bill
W2WO

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk