[TowerTalk] Hy-Tower base

[Bill Ogden]

I was thinking of how to make a base for it and when the time comes I will 
definitely get in touch with you.  I think it will be easy for someone who 
can weld.  (I once took a BOECES welding course and quickly learned that 
my skills did not go in that direction!)

Bill



From:   john nistico <electric911inc at hotmail.com>
To:     Bill Ogden <ogden at us.ibm.com>, "towertalk at contesting.com" 
<towertalk at contesting.com>
Date:   07/13/2020 05:16 PM
Subject:        [EXTERNAL] Re: [TowerTalk] Hy-Tower base



Bill if you can get me the base templates I may be able to weld up 
something for you

Get Outlook for iOS

From: TowerTalk <towertalk-bounces at contesting.com> on behalf of Bill Ogden 
<ogden at us.ibm.com>
Sent: Monday, July 13, 2020 4:17:21 PM
To: towertalk at contesting.com <towertalk at contesting.com>
Subject: Re: [TowerTalk] Hy-Tower base 
 
I am contemplating buying a Hy-Tower (AV-18HT) but would like to mount it 
on an existing concrete pad. This pad held a TX-455 until recently, is in 
good shape, and is certainly large enough. Has anyone done something like 
this? How to adapt the Hy-Tower base to an existing concrete pad?  As 
expected, I had no response from MFJ/hy-gain when I sent them the question 

and the Hy-Tower product manual is not very helpful.

Bill
W2WO 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk